1. Remove the two screws located in the door handle pocket.
2. Pry off the plastic cover behind the door handle.
3. Remove the two screws located behind the plastic cover.
4. Open the door and remove the four screws located around the window switch panel.
5. Pry off the window switch panel and disconnect the electrical connector.
6. Carefully lift off the door panel, starting from the bottom and working your way up.
7. Disconnect any electrical connectors behind the door panel.
8. Remove the door panel completely and set it aside.
When reinstalling the door panel, ensure that all screws and electrical connectors are connected securely.
