Tools Required:
1. Flathead Screwdriver
2. Hammer
3. Cold Chisel
4. Safety Goggles
Step 1: Safety Precautions:
- Put on safety goggles to protect your eyes.
Step 2: Preparation:
1. Use a hammer to tap the edges of the screw head gently. This helps loosen the screw's grip.
2. Insert a flathead screwdriver into the screw's head, ensuring a snug fit.
Step 3: Turn the Screw:
1. Rotate the screwdriver counterclockwise (lefty loosey) while applying pressure to loosen the one-way screw.
2. If it's difficult to turn, gently tap the handle of the screwdriver with the hammer to apply additional force.
Step 4: Breaking the Head:
1. If the screw remains stuck, use a cold chisel to break off the screw's head.
2. Hold the chisel perpendicular to the screw's head and strike it with the hammer until the head breaks.
Step 5: Remove the Screw:
1. Once the head is broken, you should be able to extract the remaining part of the screw using pliers or tweezers.
2. If there's still resistance, use the screwdriver or cold chisel to break the screw further until it comes out.
Step 6: Clean the Door:
1. Clean the door to remove any debris or metal fragments.
Note: Breaking the screw's head is the last resort if all other methods fail. It may damage the door and requires replacement of the screw.
Remember, one-way screws are intentionally designed to be challenging to remove. This guide aims to assist you in extracting them as safely and efficiently as possible. If you encounter any difficulties or are uncertain about the procedure, consult with a professional locksmith for assistance.
