1. Locate the Cabin Filter: The cabin filter in a 2002 Toyota Tacoma is located behind the glove compartment.
2. Remove the Glove Compartment: Open the glove compartment and locate the release tabs on the sides. Squeeze these tabs and pull the glove compartment down and out to remove it.
3. Locate the Filter Housing: Behind the glove compartment, you will see the cabin filter housing. It is usually a rectangular plastic housing with a black cover.
4. Remove the Filter Housing Cover: Press the release tabs on the filter housing cover and remove it.
5. Remove the Old Filter: Pull out the old cabin filter from the housing. Be careful not to drop any debris into the ventilation system.
6. Clean the Filter Housing: Vacuum or wipe the filter housing to remove any dust or debris.
7. Install the New Filter: Insert the new cabin filter into the housing. Make sure the filter is properly seated and the air flow arrows on the filter are facing the correct direction.
8. Replace the Filter Housing Cover: Snap the filter housing cover back into place.
9. Reattach the Glove Compartment: Align the glove compartment with the dashboard and push it back into place until it clicks shut.
That's it! You have successfully replaced the cabin filter of your 2002 Toyota Tacoma.
