1. Turn off the ignition and set the parking brake. This will ensure that the wiper blades are in a safe position and won't be damaged while you're working on them.
2. Lift the wiper arm off the windshield. To do this, simply pry up on the arm at the base of the blade until it pops up.
3. Remove the wiper blade from the arm. Once the arm is lifted, you can slide the wiper blade off. To do this, push down on the small tab at the end of the blade and pull it towards you.
4. Repeat steps 2 and 3 for the other wiper blade.
5. Install the new wiper blades. To do this, simply slide the new blade onto the arm, making sure that the tab at the end of the blade snaps into place.
6. Lower the wiper arms back onto the windshield.
7. Turn on the ignition and test the wiper blades. Make sure that they wipe the windshield evenly and clearly.
