1. Park your vehicle on a level surface and turn off the engine.
Be sure to engage the parking brake.
2. Locate the turn signal bulb.
The front turn signal bulbs are located in the front bumper, on either side of the vehicle.
3. Remove the turn signal bulb socket.
Turn the bulb socket counterclockwise until it is loose, and then pull it out of the housing.
4. Remove the old bulb from the socket.
Gently pull the old bulb out of the socket.
5. Insert the new bulb into the socket.
Make sure that the new bulb is properly seated in the socket.
6. Replace the turn signal bulb socket.
Turn the bulb socket clockwise until it is snug.
7. Test the turn signal bulb.
Turn on the turn signal and make sure that the new bulb is working properly.
8. Repeat steps 3-7 on the other side of the vehicle, if necessary.
