1. Locate the rear wiper switch on the dashboard. It is typically located on the right side of the steering wheel, near the headlight switch.
2. Turn the switch to the "On" position. The rear wiper will begin to operate.
3. Adjust the wiper speed using the variable speed dial. The higher the number selected, the faster the wiper will move.
4. Turn off the wiper switch when you are finished using it. This will help to conserve battery power.
Note: If the rear wiper does not work when you turn on the switch, check the fuse box to make sure that the wiper fuse is not blown. If the fuse is blown, replace it with a new fuse of the same amperage.
