Tools and Materials you'll need:
- New windshield wiper blades (2)
- A flat-head screwdriver or a small pry tool
Instructions :
1. Park your vehicle in a safe location and turn off the engine.
This will help to prevent any accidental injury while you are working on your vehicle.
2. Locate the windshield wiper blades.
The windshield wiper blades are the rubber blades attached to the arms that move back and forth across the windshield.
3. Press down on the release tab of the old wiper blade.
The release tab is usually located on the top of the wiper blade, near the base.
4. Pull the old wiper blade straight up to remove it from the wiper arm.
Be careful not to drop the old wiper blade on the ground.
5. Slide the new wiper blade onto the wiper arm.
Make sure that the new wiper blade is securely seated in the wiper arm.
6. Press down on the release tab to lock the new wiper blade in place.
Test the new wiper blade to make sure that it is working properly .
Additional tips:
• Before replacing the wiper blades, inspect them for any damage or wear. If the wiper blades are cracked, torn, or otherwise damaged, you should replace them immediately.
•When replacing the wiper blades, make sure that you choose the right size for your vehicle. The wiper blades must be long enough to reach the entire windshield, but not so long that they extend past the edge of the windshield.
•You can also replace the wiper arms if they are damaged or worn. To do this, you will need to remove the wiper blades and then use a wrench to loosen the bolts that hold the wiper arms in place.
