1. Gather the necessary tools and materials. You will need a Phillips head screwdriver, a flat head screwdriver, and a new turn signal bulb.
2. Park your car in a safe location and turn off the engine.
3. Open the hood of your car.
4. Locate the front turn signal housing. It is located on the front of the car, near the headlight.
5. Remove the screws holding the turn signal housing in place. Use the Phillips head screwdriver to remove the screws.
6. Gently pry the turn signal housing off of the car. Use the flat head screwdriver to pry the housing off.
7. Remove the old turn signal bulb. Twist the bulb counterclockwise to remove it from the socket.
8. Insert the new turn signal bulb. Twist the bulb clockwise to insert it into the socket.
9. Replace the turn signal housing. Gently press the housing back into place.
10. Secure the turn signal housing with the screws. Use the Phillips head screwdriver to tighten the screws.
11. Close the hood of your car.
Test the turn signal to make sure it is working properly.
