1. Locate the brake switch. It is usually mounted on the brake pedal arm.
2. Disconnect the electrical connector from the brake switch.
3. Use a wrench to loosen and remove the mounting nuts that hold the brake switch in place.
4. Remove the old brake switch from the brake pedal arm.
5. Install the new brake switch by reversing the steps above. Be sure to tighten the mounting nuts securely.
6. Reconnect the electrical connector to the brake switch.
7. Test the brake switch by pressing the brake pedal and ensuring that the brake lights illuminate.
Here are some additional tips for replacing the brake switch on a 1997 Plymouth Breeze:
* Disconnect the battery before starting any work on the brake system.
* Use a flashlight if necessary to see the brake switch and its mounting nuts.
* Be careful not to drop any nuts or bolts into the engine bay.
* If you are unsure about any of the steps, consult a professional mechanic.
