_Important note: Ensure that the vehicle is parked in a safe location and that the parking brake is engaged before proceeding._
1. Locate the e-brake adjuster: Under the car near the rear wheels.
2. Gather your tools:
- Allen wrench (typically 4 or 5 mm)
3. Access the e-brake adjuster:
- Slide under the car and locate rubber (usually black) covers near your rear tires.
4. Remove the covers:
5. Turn the adjuster:
- There will likely be a metal bolt.
- Turn it clockwise a few clicks until the brakes begin to engage when you apply the hand brake.
- Ensure the brakes do not engage until the 3rd or 4th click as you pull up the hand brake inside.
6. Test the brake:
- Test the brake by pulling the hand brake and ensure it holds the car in place.
7. Reinstall the covers:
- After adjusting, reinstall the rubber covers to protect the adjuster.
The emergency brake should now be properly adjusted. Remember, if you're unsure about any part of this process, it's best to consult with a qualified mechanic for assistance.
