2. Locate the shift knob release button. On most 1992 Mustangs, this button is located on the side of the shift knob, near the top.
3. Press the shift knob release button and pull the shift knob straight up. The shift knob may be difficult to remove, so you may need to use some force.
4. Once the shift knob is removed, you can access the shift linkage. The shift linkage is the mechanism that connects the shift lever to the transmission.
5. To remove the shift linkage, you will need to remove the two bolts that hold it in place. These bolts are located on either side of the shift linkage.
6. Once the bolts are removed, you can lift the shift linkage up and out of the way.
7. Now, you can access the transmission control cable. The transmission control cable is the cable that connects the shift lever to the transmission.
8. To remove the transmission control cable, you will need to remove the two bolts that hold it in place. These bolts are located on either side of the transmission control cable.
9. Once the bolts are removed, you can disconnect the transmission control cable from the transmission.
10. Now, you can remove the shift lever. To do this, you will need to remove the two bolts that hold it in place. These bolts are located on either side of the shift lever.
11. Once the bolts are removed, you can lift the shift lever up and out of the transmission.
12. Now, you can install the new shift knob, shift lever, transmission control cable, shift linkage, and bolts.
13. Finally, test the new shift knob to make sure it is working properly.
