- Lug wrench
- Flathead screwdriver
- Hammer
Instructions:
1. Loosen the lug nuts on the rear wheels. It may be necessary to use a breaker bar to loosen the lug nuts.
2. Note: Do not remove the lug nuts completely.
3. Use the lug wrench to turn the lug nuts counterclockwise until they are loosened, then remove them using a flathead screwdriver.
4. Carefully pry the brake drum off of the wheel hub using the flathead screwdriver. It may be necessary to use a hammer to loosen a stuck drum.
6. Once the drum is removed, inspect the brake shoes and hardware. If the brake shoes are worn or damaged, they will need to be replaced.
7. Reassemble the brake components by reversing the steps listed above.
8. Be sure to tighten the lug nuts securely before driving.
