Tools and Materials:
New wiper blades (appropriate size for your vehicle)
Clean cloth
Mild detergent
Instructions:
1. Preparation:
Turn off the vehicle and ensure the windshield is clean and dry.
2. Locate the Wiper Blades:
Lift the wiper arm away from the windshield. Be cautious not to let it snap back.
3. Release the Old Blade:
Press the release tab on the wiper arm to release the old wiper blade.
4. Remove the Old Blade:
Slide the old wiper blade off the arm.
5. Clean the Wiper Arm:
Use a clean cloth and mild detergent to clean the wiper arm. This helps remove any dirt or debris that may affect the new blade's performance.
6. Insert the New Blade:
Align the new wiper blade with the wiper arm and slide it into place.
7. Secure the New Blade:
Press the release tab again to secure the new wiper blade in place.
8. Repeat for the Other Side:
Repeat the process for the other wiper arm and replace the old blade with a new one.
9. Test the Wiper Blades:
Turn on the vehicle and test the wiper blades to ensure they work correctly.
10. Final Check:
Lower the wiper arms back to their original position.
By following these steps, you can successfully replace the wiper blades on your 2006 Ford Escape. Remember, it's important to replace wiper blades regularly to maintain good visibility and driving safety during inclement weather conditions.
