1. Locate the OBD-II port: This is usually located under the dashboard, near the steering wheel.
2. Connect an OBD-II scanner: Plug the OBD-II scanner into the port.
3. Turn on the ignition: Turn on the ignition without starting the engine.
4. Access scanner menu: Follow the instructions on the scanner to access the menu.
5. Select the "reset check engine light" option: This may be listed as "reset ECU" or "clear DTCs".
6. Confirm the reset: Confirm the reset when prompted by the scanner.
7. Turn off the ignition: Turn off the ignition and unplug the OBD-II scanner.
8. Start the engine: Start the engine and check if the check engine light is reset.
If the check engine light remains on, there may be an underlying issue with the vehicle that requires further diagnosis and repair. It's recommended to have your vehicle inspected by a qualified mechanic if the light does not reset or persists after resetting.
