* Phillips Head Screwdriver
* Flat Head Screwdriver
* Speaker Wire Strippers
* Wire Crimpers
Instructions:
1. Pull the rear seat bottom upwards and then remove it from the vehicle.
2. Next, remove the rear lower side panel by gently pulling outward on it.
3. Remove the two screws located in the upper passenger compartment using a Phillips Head Screwdriver.
4. Remove the two 12-mm bolts located at the bottom of the seat backs using a wrench.
5. Fold down the rear seatbacks in order to allow access to the rear speakers.
6. Using the flathead screwdriver, pry off the speaker grills.
7. Disconnect the speaker wires from the speaker terminals by pinching the metal tabs on the speaker connector and pulling the connector off of the speaker terminals.
8. Remove the four 10-mm bolts that secure the speaker to the door panel using a socket wrench or wrench.
9. Remove the speaker from the door panel.
