Tools Needed:
- Flat-head screwdriver
- New gear stick knob (ensure it fits the thread type and size of your vehicle's gear shaft)
Steps to Replace Gear Stick Knob:
1. Remove Old Gear Stick Knob:
- Grip the old gear stick knob firmly with one hand.
- Use the flat-head screwdriver to pry open the plastic cover/collar around the base of the knob. Be gentle to avoid breaking the tabs.
- Once the cover is loose, gently pull it off to expose the gear stick shaft and the retaining screw (if any).
- If there's a retaining screw holding the knob in place, use the screwdriver to loosen and remove it.
2. Unscrew the Old Knob:
- Firmly grip the old knob and start twisting it counterclockwise to unscrew it from the gear stick shaft.
- If it's stuck, you can gently wiggle the knob while turning it to help loosen it.
- Keep turning until the knob comes off completely.
3. Install the New Knob:
- Take your new gear stick knob and align the threads with the gear stick shaft.
- Screw the new knob onto the shaft, turning it clockwise until it's secure.
- Make sure the knob is firmly in place and doesn't wobble or move too freely.
4. Reattach the Cover:
- Reposition the plastic cover you removed earlier around the base of the new knob.
- Gently press the cover down to snap it into place, ensuring all tabs engage and hold it securely.
- Check the cover is properly seated all the way around the knob.
That's it! You've successfully replaced the gear stick knob on your Fiat Scudo.
