1. Press the "Trip" button on the instrument panel to select the trip computer mode.
2. Once in the trip computer mode, press and hold the "Reset" button for at least two seconds.
3. The clock display will start flashing.
4. Use the "Hour" and "Minute" buttons to adjust the time.
5. Once the correct time is set, press the "Set" button to save the changes.
If the push button is not working, here are some things you can check:
1. Make sure that the clock is turned on. The clock button should be illuminated when the clock is on.
2. Check the fuse for the clock. The fuse for the clock is located in the fuse box under the hood.
3. If the fuse is blown, replace it with a new fuse of the same amperage.
4. If the fuse is not blown, there may be a problem with the wiring to the clock. You will need to take your car to a qualified mechanic to have the wiring checked.
