* Replacement headlight bulb (check owner's manual for specific type)
* Socket wrench set
* Phillips screwdriver
Instructions
1. Park your car in a safe location and turn off the engine.
2. Open the hood of your car.
3. Locate the headlight assembly that you need to replace. It is typically held in place by several bolts.
4. Use the socket wrench to remove the bolts that hold the headlight assembly in place.
5. Once the bolts are removed, carefully remove the headlight assembly from the car.
6. Disconnect the electrical connector from the back of the headlight assembly.
7. Use the Phillips screwdriver to remove the screws that hold the old headlight bulb in place.
8. Remove the old headlight bulb from the assembly.
9. Insert the new headlight bulb into the assembly and secure it with the screws.
10. Reconnect the electrical connector to the back of the headlight assembly.
11. Reinstall the headlight assembly into the car and secure it with the bolts.
12. Close the hood of your car.
*Note: The steps for changing a headlight on a 2005 Buick Allure may vary slightly depending on the year and model of your vehicle. Always consult your owner's manual for specific instructions.*
