1. Remove the door panel.
- Open the rear door.
- Locate the two screws on the inside edge of the door handle.
- Remove the screws using a Phillips head screwdriver.
- Locate the two plastic clips on the bottom edge of the door panel.
- Pry the clips out using a flathead screwdriver.
- Pull the door panel straight up to remove it.
2. Disconnect the door handle cable.
- Locate the door handle cable attached to the door handle.
- Disconnect the cable by pressing on the release tab and pulling the cable out.
3. Remove the door handle.
- Locate the three screws that hold the door handle in place.
- Remove the screws using a Phillips head screwdriver.
- Pull the door handle out to remove it.
