Auto >> AutoSPT >  >> Auto Repair

How do you replace the side view mirror on a 1997 Mercedes SL 600?

Replacing the side view mirror on a 1997 Mercedes-Benz SL 600 involves the following steps:

1. Gather Tools and Materials:

- Replacement side view mirror (matching your vehicle's make, model, and year)

- Torx screwdriver set

- Flat-head screwdriver

- Phillips head screwdriver

- Trim removal tool (optional)

2. Prepare the Car:

- Park the vehicle on a level surface and engage the parking brake.

- Turn off the engine and allow it to cool down.

3. Remove the Interior Door Panel:

- Open the door and locate the screws securing the interior door panel.

- Use a Torx screwdriver to remove these screws.

- Gently pry off the door panel using the flat-head screwdriver or a trim removal tool, starting from one corner and working your way around the panel.

- Disconnect any electrical connectors or switches attached to the door panel and set the panel aside.

4. Locate the Mirror Mount Screws:

- With the door panel removed, you'll see the side view mirror assembly.

- Locate the screws securing the mirror to the door.

5. Disconnect Electrical Connectors:

- Carefully detach any electrical connectors that provide power and control to the side mirror, including those for power adjustment, heated mirror, and turn signal indicator.

6. Remove the Old Side Mirror:

- Use a Phillips head screwdriver to remove the screws holding the mirror assembly in place.

- Gently remove the old side view mirror from the vehicle.

7. Install New Mirror:

- Position the new side view mirror in place, ensuring that the mounting bracket aligns with the screws.

- Secure the mirror by inserting and tightening the Phillips head screws.

8. Reconnect Electrical Connectors:

- Reattach the electrical connectors that you disconnected earlier.

9. Test Mirror:

- Adjust the new mirror to the desired position and test its functions, such as power adjustment and heated mirror. Make any necessary adjustments.

10. Replace the Interior Door Panel:

- Reinstall the interior door panel by aligning it properly and securing it with the Torx screws that you removed earlier.

- Reconnect any electrical connectors or switches that were disconnected during disassembly.

11. Final Check:

- Make sure the new side view mirror is securely mounted and all functions are working correctly.

Note: Side mirror replacements can vary slightly between models and years. It's always a good idea to consult your vehicle's service manual or a professional for specific instructions if needed.