1. Get in the driver's seat and close all doors.
2. Switch on the ignition, but don't start the engine (make sure the brake pedal is not pressed).
3. Press and hold the bottom '0' trip reset button on the instrument cluster.
4. Continue holding the reset button and, after around five seconds, switch off the ignition.
5. Continue to hold the reset button until the service intervals appear in the display, then release.
6. The service indicator will now begin to flash in the display.
7. Press and release the '0' reset button to cycle through the service intervals that need resetting.
8. Once the desired interval is displayed, turn the ignition back on. The display should now show 'Service XX Reset'.
9. Press and hold the '0' reset button until the display changes to 'Service XX OK!' to confirm the reset.
10. Turn off the ignition and that interval is now reset.
11. Repeat steps 3 to 10 to clear any additional service reminders.
12. Once all reminders have been reset, turn off the ignition and then switch it back on. The message 'Service' will no longer be displayed.
13. Switch on the ignition again, and the 'Trip xx' display will be illuminated.
