1. Tools You'll Need:
* Screwdrivers: Likely a combination of Phillips and flathead screwdrivers. Check for the type of fasteners used on your specific model year.
* Socket Set (possibly): Some models might use bolts instead of just screws.
* Wrench (possibly): Same as above.
* Shop towels or rags: To protect the upholstery and catch any dropped parts.
2. Preparation:
* Consult your owner's manual: This is crucial. The manual will have specific instructions and diagrams tailored to your exact vehicle year and model. This is the best place to start.
* Remove any cargo: Clear out anything from the trunk and the area around the rear seat.
3. Removal Process (General Steps):
* Access the seatback: You'll likely need to fold down the seatback (if it folds) to access the attachment points.
* Locate the fasteners: Look along the bottom of the seatback and along the seat cushion's edges where it meets the body of the car. These fasteners will be screws or possibly bolts.
* Remove the fasteners: Carefully remove each fastener. Take note of how the seat is attached to keep reassembly easier.
* Disconnect any electrical connectors: Some models have seat heaters or other electrical components. If present, carefully disconnect these connectors. Take a picture before disconnecting to aid reassembly.
* Lift the seatback: Once all fasteners are removed, carefully lift the seatback out of the vehicle. It might be heavy, so be prepared.
* Remove the seat cushion (if necessary): Depending on your model, the seat cushion might be attached separately. Follow the same steps as above to locate and remove its fasteners.
* Remove the seat cushion: Lift the cushion out carefully.
Important Considerations:
* Year and model variations: The specific location and type of fasteners will vary depending on the year of your Cadillac DTS. Always refer to your owner's manual for precise instructions.
* Safety: Ask for help if needed. The seat can be heavy and awkward to maneuver.
* Take pictures: Take pictures of the removal process, especially of the fastener locations and wiring connectors. This will be invaluable when you reinstall the seat.
Without knowing the exact year of your Cadillac DTS, this is the most general guide I can provide. Refer to your owner's manual for detailed, year-specific instructions. This is crucial to avoid damaging your vehicle.
