Here's a general outline of the process. This is not a comprehensive guide and you should consult a repair manual specific to your 1999 Dodge Ram model for detailed instructions and diagrams. Improper disassembly could damage your vehicle's components.
General Steps (May Vary):
1. Access the Blower Motor: This usually involves removing parts of the dashboard. You'll likely need to remove the glove box, possibly some trim pieces around the radio and HVAC controls, and potentially even the center console. Consult your repair manual for the exact steps.
2. Disconnect Electrical Connections: Once you have access to the blower motor, disconnect the electrical connector leading to the motor. Take photos or make notes to remember how it's connected for reassembly.
3. Remove the Blower Motor Housing: This is often held in place by screws or clips. You may need to remove the housing to access the motor itself. Again, your repair manual will show the location of these fasteners.
4. Remove the Blower Motor: The blower motor itself might be held in place by screws or clips. Be careful not to damage the motor or its surrounding components during this step. Sometimes the motor is simply pushed in place and can be pulled out after loosening or removing mounting screws on the blower motor housing.
5. Installation (Reverse Order): Once you've replaced the blower motor, carefully reassemble everything in the reverse order of disassembly. Ensure all electrical connections are secure and all screws and clips are properly fastened. Double-check your work before testing the system.
Important Considerations:
* Repair Manual: A repair manual specific to your 1999 Dodge Ram is highly recommended. This will provide detailed diagrams and instructions tailored to your vehicle.
* Tools: You'll need a variety of tools, including screwdrivers (Phillips and flathead), possibly sockets and wrenches, and possibly trim removal tools to avoid damaging the interior plastics.
* Patience: This is not a quick job and requires patience and careful attention to detail.
* Safety: Remember to disconnect the negative battery terminal before starting.
If you're not comfortable performing this repair yourself, it's best to take your vehicle to a qualified mechanic. Improperly installing the blower motor could lead to further damage or even safety hazards.
