1. Gather Tools:
- New Fog Light Bulb (make sure it matches your vehicle's specifications)
- Phillips head screwdriver
- Flashlight (for better visibility)
- Clean cloth or rag
2. Prepare the Area:
- Park your car on a level surface and turn off the engine.
- Allow the vehicle to cool down if the engine has been running.
- Engage the parking brake to ensure stability.
3. Locate Fog Light Access:
- The fog light assembly is usually located in the front bumper, on either side of the vehicle.
- Look for a small, covered opening or access panel in the bumper.
4. Remove Access Cover:
- Carefully pry open the access cover using a flat-head screwdriver or appropriate tool.
- Be cautious not to damage the cover or surrounding area.
5. Locate the Fog Light Bulb:
- Once the access cover is removed, you should be able to see the fog light bulb mounted in the assembly.
- It may be secured by a retaining clip or socket.
6. Disconnect Electrical Connector:
- Gently disconnect the electrical connector that supplies power to the fog light bulb.
- Press the release tab or squeeze the connector to disconnect it from the bulb.
7. Remove the Fog Light Bulb:
- If the bulb is held by a retaining clip, carefully remove it.
- If the bulb is held in place by a twist-and-lock mechanism, turn it counterclockwise until it comes out of its socket.
8. Install New Fog Light Bulb:
- Take the new fog light bulb and insert it into the socket, guiding it securely.
- If it has a retaining clip, secure it properly.
- If it uses a twist-and-lock mechanism, turn the bulb clockwise until it locks in place.
9. Reconnect Electrical Connector:
- Reattach the electrical connector to the new fog light bulb.
- Ensure that the connection is secure to avoid any electrical issues.
10. Replace Access Cover:
- Carefully replace the access cover and secure it back in place.
- Make sure it's firmly closed to prevent water or debris from entering the assembly.
11. Test the Fog Lights:
- Start the engine and turn on the fog lights to verify they are working properly.
- If both fog lights are functioning, you have successfully replaced the fog light bulb on your 2003 Dodge Neon.
12. Clean Up:
- Dispose of any old bulbs or waste responsibly.
- Clean up any debris or tools you may have used.
