1. Check the Coolant Level:
- Ensure the engine has cooled down completely.
- Open the hood and check the coolant level in the reservoir.
- If the coolant is below the "MIN" mark, refill it with the recommended coolant specified in your owner's manual.
2. Check the Fuel Tank:
- Open the fuel cap and inspect if there's any fuel left.
- If the fuel tank is empty, you'll need to refuel your car with unleaded gasoline.
3. Check Battery Connections:
- Ensure that the battery terminals are clean, tight, and free of corrosion.
- If they are corroded, clean them using a wire brush or a terminal cleaning tool.
- Tighten the connections if necessary.
4. Check Spark Plugs:
- If your Camry has been sitting for a while since the incident, the spark plugs might be fouled or damaged.
- Remove and inspect the spark plugs. If they're worn or damaged, replace them with new ones.
5. Crank the Engine:
- Once the above steps are completed, try starting your car.
- Turn the key to the "ON" position, but don't engage the starter yet.
- Listen carefully for the fuel pump to engage and build pressure.
- If you hear the fuel pump running, then turn the key to the "START" position and crank the engine.
6. Let It Cool Down:
- If the engine fails to start, allow it to cool down again before attempting to start it again.
- Prolonged cranking without starting can cause further damage to the engine.
7. Seek Professional Assistance:
- If none of the suggested steps help, it's best to seek professional assistance from a qualified mechanic.
- They can diagnose the exact issue and perform the necessary repairs or maintenance.
Remember, safety should be a priority when working on your vehicle. If you're unsure about any of the steps or encounter any difficulties, don't hesitate to call for professional help.
