Turn off the engine. Let the car cool down for a few minutes if it has been running.
Open the hood. Pull the release lever on the driver's side footwell and lift the hood.
Remove the protective cap. The headlight bulb is located behind a protective cap. Rotate the cap counterclockwise to remove it.
Disconnect the electrical connector. Press down on the release tab and pull the electrical connector off of the headlight bulb.
Remove the headlight bulb. Turn the bulb counterclockwise and pull it out of the housing.
Insert the new headlight bulb. Push the new bulb into the housing and turn it clockwise to lock it in place.
Reconnect the electrical connector. Make sure the connector is fully seated.
Replace the protective cap. Rotate the cap clockwise until it clicks into place.
Close the hood. Push the hood down until it latches.
Here are some additional tips:
* Make sure you replace both headlights at the same time. This will ensure that the light output is balanced.
* If you are not comfortable replacing the headlights yourself, you can take the car to a qualified mechanic.
* Be sure to dispose of the old headlight bulbs properly. They contain hazardous materials that should not be put in the trash.
