1. Park your Wolverine on a level surface and turn off the engine.
2. Locate the oil filter on the left side of the engine, just below the cylinder head.
3. Place an oil pan under the oil filter to catch any dripping oil.
4. Use an oil filter wrench to loosen and remove the oil filter.
5. Inspect the oil filter for any damage or debris and replace it if necessary.
6. Apply a thin coat of new oil to the new oil filter gasket.
7. Screw the new oil filter onto the oil filter housing by hand until it is snug.
8. Use the oil filter wrench to tighten the oil filter until it is snug.
9. Add new oil to the engine according to the owner's manual.
