How do you adjust level on air ride suspension steering axle peterbilt?

1. Locate the air ride leveling valve on the axle.
2. Attach an air hose to the leveling valve.
3. Apply air pressure to the leveling valve until the axle reaches the desired height.
4. Secure the axle at the desired height using the lock nut.
5. Repeat steps 2-4 for the other axle, if necessary.

If you do not have an air source, you can also use a pry bar to adjust the level of the air ride suspension steering axle. To do this, follow these steps:

1. Locate the air ride leveling valve on the axle.

2. Insert the pry bar into the hole on the leveling valve.

3. Pry up or down on the pry bar until the axle reaches the desired height.

4. Secure the axle at the desired height using the lock nut.

Repeat steps 2-4 for the other axle, if necessary.