Where are the wsater pump bolts on88 f150?

The water pump bolts on an 88 F150 are located on the front of the engine, just below the thermostat housing. There are four bolts in total, and they are all the same size. To access the bolts, you will need to remove the fan shroud.

Here are the steps on how to remove the water pump bolts on an 88 F150:

1. Disconnect the negative battery cable.

2. Drain the coolant from the engine.

3. Remove the fan shroud.

4. Locate the four water pump bolts.

5. Use a wrench to loosen the bolts.

6. Remove the bolts and then remove the water pump.

Be careful not to drop the bolts into the engine. If you do, you will need to fish them out with a magnet.

Here is a diagram of the water pump bolts on an 88 F150:

[Image of water pump bolts]