The fuel pump on a 1993 Ford Bronco is located inside the fuel tank. To access the fuel pump, you will need to remove the fuel tank.
Here are the steps on how to remove the fuel tank and access the fuel pump:
1. Park your Bronco on a level surface and turn off the engine.
2. Locate the fuel tank under the rear of your Bronco.
3. Disconnect the negative battery cable from the battery.
4. Use a jack and jack stands to raise the rear of the Bronco until the wheels are off the ground.
5. Locate the fuel lines and disconnect them from the fuel tank. Be careful not to spill any fuel.
6. Locate the fuel tank straps and remove them.
7. Carefully lower the fuel tank from the Bronco.
8. The fuel pump is located on the top of the fuel tank. Remove the access cover to access the fuel pump.
9. Disconnect the electrical connector from the fuel pump.
10. Remove the fuel pump from the tank.
11. Replace the fuel pump and reinstall the access cover.
12. Reinstall the fuel tank and reconnect the fuel lines.
13. Reinstall the fuel tank straps.
14. Lower the Bronco and reconnect the negative battery cable.
15. Start the engine and check for any leaks.
