1. Open the hood of your car.
2. Locate the headlight assembly.
The headlight assembly is located behind the front bumper. You can access it by removing the plastic cover that is held in place by a few screws.
3. Disconnect the electrical connector.
There is an electrical connector that is attached to the headlight assembly. Disconnect this connector by squeezing the release tabs and pulling it off.
4. Remove the mounting bolts.
There are two or three mounting bolts that hold the headlight assembly in place. Remove these bolts using a socket wrench or a screwdriver.
5. Remove the headlight assembly.
Once the mounting bolts are removed, you can remove the headlight assembly by pulling it straight out of the car.
6. Install the new headlight assembly.
Insert the new headlight assembly into the car. Make sure that the mounting tabs are aligned with the holes in the car's body.
7. Install the mounting bolts.
Replace the mounting bolts that you removed earlier. Tighten the bolts until they are snug.
8. Connect the electrical connector.
Connect the electrical connector that you disconnected earlier.
9. Replace the plastic cover.
Replace the plastic cover that you removed earlier.
10. Close the hood of your car.
Your new headlight is now installed.
