Tools and Materials Needed:
- Replacement fog light assembly
- Socket wrench set
- Phillips head screwdriver
- Flat-head screwdriver (or plastic pry tool)
Instructions:
1. Prepare Your Vehicle:
- Park your vehicle on a level surface.
- Turn off the engine and allow it to cool down.
- Engage the parking brake.
2. Locate the Fog Light Assembly:
- Open the hood of your BMW 745.
- The fog lights are usually located in the lower front bumper, on either side of the vehicle.
3. Remove the Bumper Cover:
- You may need to remove the front bumper cover to access the fog light assembly.
- Refer to your vehicle's specific repair manual for instructions on removing the bumper cover.
4. Access the Fog Light Housing:
- Once the bumper cover is removed, you should have better access to the fog light housing.
- Locate the screws or fasteners holding the fog light in place.
5. Disconnect the Electrical Connector:
- Before you remove the old fog light, disconnect the electrical connector that powers it.
- Use a flat-head screwdriver or a plastic pry tool to gently release the connector.
6. Remove the Old Fog Light:
- Use a socket wrench to loosen and remove the screws or fasteners holding the fog light assembly in place.
- Carefully remove the old fog light assembly from its housing.
7. Install the Replacement Fog Light:
- Position the new fog light assembly into the housing.
- Secure it in place using the screws or fasteners removed earlier.
- Reconnect the electrical connector.
8. Reattach the Bumper Cover:
- If you removed the bumper cover, reinstall it now, following the reverse order of the removal process.
9. Test the Fog Lights:
- Turn on the headlights and the fog lights to ensure that they are working properly.
Remember, specific steps may vary slightly based on your exact vehicle model and trim level. Always refer to a reliable vehicle repair manual or seek the assistance of a qualified mechanic if you are not comfortable with vehicle repairs.
