Many Honda Accord owners rely on their car’s radio to keep you entertained and informed while on the go. But what do you do when the dreaded “Error E” pops up on the screen, preventing you from listening to your favorite stations?
Don’t worry – we’re here to help you with the reset. In this blog post, we will walk you through the process of resetting the Honda Accord radio code error E.
When the radio displays error code E, disconnect the black negative battery cable for one to three minutes to reset it. Look for the word “code” after turning the radio back on and enter the 5-digit radio code, and the radio should turn back on.
The Honda Accord is a series of automobiles manufactured by the Japanese automaker Honda since 1976, best known for its four-door sedan variant, which has been one of the best-selling cars in the United States since 1989.
The Accord nameplate has been applied to a variety of vehicles worldwide, including coupes, wagons, hatchbacks, and a crossover.
Recent models of the Honda Accord come with a highly interactive infotainment system that includes features such as Apple CarPlay and Android Auto integration, satellite radio, and HondaLink. This system is designed to make your driving experience more enjoyable and convenient.
A radio error E is a general protection fault code that indicates an issue with the car’s audio system. This can be caused by a number of things, including a loose connection, an accessory that has been added to the system, or a problem with the software.
When your honda radio asks you to input the code, it either means that the battery has died or that you just newly replaced it. You’ll need a radio code that may be accessed through the honda databases to reset it.
If this is your first time, don’t worry – the process is simple and only takes a few minutes if you follow the steps below:
First, locate the serial number of your radio. This can be found on a sticker that is affixed to the top or side of the radio unit. Once you have located the serial number, call Honda customer service at 800-999-100 Nine and request the radio code for your vehicle.
Be sure to have the following information ready when you call:
A customer service representative will ask you for this information to verify your identity and pull up the radio code for your vehicle.
Turn on your car and press the “AUX” button on your radio. This will put the radio into the auxiliary mode, allowing you to input the code.
In case you do not see an AUX button, look for a button that says “MODE” or “SOURCE.” Pressing this button will cycle through the different modes until you reach auxiliary.
You can also put the car into accessory mode by turning the key to the “ACC” position without starting the engine. This will power on the radio without starting the car, allowing you to input the code.
Once you have the radio in auxiliary mode, press the “PWR” or “POWER” button to turn the radio off. This is typically located on the face of the radio.
While holding the numbers one and six, with your free hand, press the power-on button. Your car radio’s serial number will appear on the display.
5. Input the five-digit code using the preset buttons on your radio. The first digit of the code corresponds to the first preset button, and so on. For example, if your code is 43679, you would press “43.”
Release the one and six buttons after you have inputted all five digits of the code. The radio should turn back on, and you can begin using it as normal.
Yes, there are a few other ways that you can reset the code on your Honda radio. These methods may vary depending on the model of your car, so it is best to consult your owner’s manual or contact a Honda dealer for more specific instructions.
One method is to disconnect the battery and then reconnect it after a few minutes. This will reset the radio and allow you to input the code.
Another method is to press and hold the power button on the radio for at least five seconds. This will also reset the radio and allow you to input the code.
No, you should not have to reset the radio every time you disconnect the battery. The code is typically only required when you replace the battery or if the power to the radio is interrupted for some reason.
When you find that you are having to reset the code frequently, there may be an issue with the battery or electrical system in your vehicle. It is best to consult a Honda dealer or qualified mechanic to diagnose and resolve the problem.
Yes, there are other error codes that can display on your Honda radio. These codes indicate different issues and will require different solutions. Some of the most common error codes are:
Error Code B: This code indicates that the battery in your vehicle is low and needs to be charged.
Error Code P: This code indicates that there is an issue with the audio system in your vehicle.
Error Code U: This code indicates that there is an issue with the USB port in your vehicle.
In case you see any of these error codes, or any other that we have not highlighted, it is best to consult your owner’s manual or contact a Honda dealer for further assistance.
A: If you see the error E code on your Honda radio, it means that the radio is locked and needs a five-digit code to be entered in order to unlock it.
The serial number for your car radio is typically located on the face of the radio or on the side of the unit.
In case you cannot find your car owner’s manual, you can contact a Honda dealer or qualified mechanic for more information. You can also find helpful information on the Honda website.
No, you should not need to enter the code every time you turn on your radio. The code is typically only required when you replace the battery or if the power to the radio is interrupted for some reason.
There are other error codes that can display on your Honda radio. These codes indicate different issues and will require different solutions.
We hope that this article was helpful in explaining how to reset the Honda Accord radio code error E. If you have any further questions, please feel free to reach out to us. We would be more than happy to help.
