- New headlight bulb
- Socket wrench set
1. Open the hood of the vehicle.
2. Locate the round cap that covers the headlight assembly. Twist the cap counterclockwise to remove it.
3. Remove the rubber gasket that is inside the hole.
4. Using the socket wrench, loosen the three screws that hold the headlight assembly in place.
5. Pull the headlight assembly out towards the front of the car.
6. Disconnect the electrical connector from the back of the headlight assembly.
7. Gently remove the old headlight bulb from its socket.
9. To replace the bulb, insert it into the socket and make sure that it is seated properly.
10. Reconnect the electrical connector.
11. Reinsert the headlight assembly into its housing and secure it with the screws.
12. Replace the rubber gasket and the round cap.
13. Close the hood of the vehicle.
