1. Turn off the windshield washer system. This will prevent the pump from running and potentially damaging the tank or lines.
2. Open the hood of your car. This will give you access to the windshield washer tank.
3. Locate the windshield washer tank. This is usually a plastic container located near the front of the car, on either the driver's or passenger's side.
4. Pour a mixture of 50% isopropyl alcohol and 50% water into the tank. This mixture will help to melt the ice inside the tank.
5. Let the mixture sit for a few minutes. This will give the mixture time to melt the ice.
6. Turn on the windshield washer system. This will help to circulate the mixture and ensure that the ice is completely melted.
7. Repeat steps 4-6 if necessary. If the ice is still not melted, you may need to repeat steps 4-6 a few times.
8. Once the ice is melted, fill the tank with windshield washer fluid. This will help to protect the tank and lines from freezing in the future.
Additional tips:
* If you are in a hurry, you can use hot water instead of the mixture of alcohol and water. However, be careful not to pour boiling water into the tank, as this could damage the plastic.
* You can also use a hair dryer to melt the ice inside the tank. However, be careful not to let the hair dryer touch the plastic, as this could damage the tank.
* If you are unable to remove the ice from the windshield washer tank yourself, you may need to take your car to a mechanic.
