The catalytic converter on a 1994 Honda Accord is located beneath the vehicle, between the engine and the muffler. It is a cylindrical-shaped object with two pipes connected to it. The front pipe connects to the exhaust manifold and the rear pipe connects to the muffler.
Tools Needed
To change the catalytic converter, you will need the following tools:
* Jack
* Jack stands
* Socket wrench set
* Wrench set
* Prying bar
* Safety glasses
* Gloves
* New catalytic converter
Procedure
Follow these steps to change the catalytic converter on a 1994 Honda Accord:
1. Park your vehicle on a level surface and apply the parking brake.
2. Turn off the engine and allow it to cool down.
3. Raise your vehicle using the jack and jack stands. Make sure that the vehicle is securely supported before you get underneath it.
4. Locate the catalytic converter. It is located beneath the vehicle, between the engine and the muffler.
5. Loosen the bolts connecting the catalytic converter to the exhaust manifold and muffler using the socket wrench set.
6. Spray a penetrating lubricant on the bolts, let it sit for a few minutes, then try to loosen them again. If the bolts are still stuck, you may need to use a prying bar to help loosen them.
7. Once the bolts are loose, remove them and remove the catalytic converter from the vehicle.
8. Install the new catalytic converter in the reverse order that you removed the old one.
9. Tighten the bolts securely.
10. Lower your vehicle using the jack and jack stands.
Tips
Here are a few tips to help you change the catalytic converter on a 1994 Honda Accord:
* Make sure that you disconnect the battery before you begin working on the exhaust system.
* Use safety glasses and gloves to protect yourself from hot and sharp objects.
* If you are not comfortable working on your vehicle, you can take it to a qualified mechanic to have the catalytic converter changed.
