Step 1: Remove the door handle bezel
1. Pry the door handle bezel off using a flat-head screwdriver.
2. Remove the two Phillips head screws behind the bezel.
Step 2: Remove the door handle
1. Remove the two 10 mm bolts holding the door handle in place.
2. Remove the door handle.
Step 3: Remove the window crank bezel
1. Pry the window crank bezel off using a flat-head screwdriver.
2. Remove the two Phillips head screws behind the bezel.
Step 4: Remove the window crank
1. Remove the two 10 mm bolts holding the window crank in place.
2. Remove the window crank.
Step 5: Remove the door panel
1. There are 4 clips along the top of the door panel. Pull the panel slightly away from the door and gently pry the panel out using the flat-head screwdriver. Pull the panel straight up and away from the door. Be careful, the clips can pull through the panel if you are not careful.
2. There are clips also on the side, bottom and back of the panel. Pull straight away from the door to remove the panel.
Step 6: Disconnect the door panel connectors
1. Disconnect the door panel connectors by pressing the locking tabs and pulling the connectors apart.
Step 7: Remove the door panel
1. Once all the connectors are disconnected, you can remove the door panel.
To reinstall the door panel, simply follow the steps in reverse order.
