1. Purchase Replacement Base: Acquire the replacement aerial mounting base specific to your Peugeot 206 CC model.
2. Gather Tools: You'll need a Phillips-head screwdriver, electrical tape, and a replacement aerial base gasket (if included with the new base).
3. Remove the Trunk Liner: Open the trunk and remove the trunk liner by gently pulling it off.
4. Disconnect the Aerial Cable: Locate the aerial cable connected to the existing mounting base. Disconnect the cable by gently pressing the release tab.
5. Unscrew the Old Base: Use the Phillips-head screwdriver to remove the screws holding the old aerial mounting base in place. Be careful not to drop any screws into the trunk.
6. Replace the Gasket (if applicable): If your replacement base comes with a new gasket, remove the old gasket and replace it with the new one.
7. Install the New Base: Position the new aerial mounting base in place and align the screw holes. Use the screws from the old base to secure the new base tightly.
8. Reconnect the Cable: Connect the aerial cable to the new mounting base by firmly pushing it into the connector.
9. Test the Aerial: Turn on the radio and check if the aerial is receiving signals properly.
10. Replace the Trunk Liner: Reinstall the trunk liner by carefully placing it back in position.
Now, your Peugeot 206 CC's aerial mounting base should be successfully replaced.
