2. Check the pushrod seals for wear or damage. If the seals are worn or damaged, they will need to be replaced.
3. Tighten the pushrod tubes. The pushrod tubes should be tightened to the manufacturer's specifications.
4. Apply a sealant to the pushrod tubes. A sealant can help to prevent oil from leaking from the pushrod tubes. Silicone is ideal.
5. Replace the pushrod covers. The pushrod covers should be replaced with new gaskets.
6. Test the bike for leaks. Start the bike and let it run for a few minutes. Check the pushrod tubes and covers for leaks. If there are any leaks, repeat steps 1-5.
