* Replacement quarter glass
* Rubber gasket
* Primer
* Black sealant
* Installation tools
Instructions:
1.) Remove the old quarter glass by carefully removing the rubber gasket and sealant around the glass. Be sure to be careful not to damage the paint on the car.
2.) Clean the area around the glass opening to remove any dirt or debris.
3.) Apply a thin coat of primer to the area around the glass opening.
4.) Cut the rubber gasket to size and place it around the quarter glass.
5.) Apply sealant around the edge of the glass.
6.) Carefully insert the glass into the opening. Make sure to press firmly to ensure a good seal.
7.) Hold the glass in place with installation tools. Allow the sealant to dry according to the manufacturer's instructions.
8.) Remove the installation tools.
