* Your vehicle's keys
* A screwdriver
* A blank transponder key
Instructions:
1. Insert the original key into the ignition and turn it to the “ON” position.
2. Do not start the engine.
3. Remove the original key from the ignition.
4. Within 10 seconds, insert the blank transponder key into the ignition and turn it to the “ON” position.
5. Do not start the engine.
6. Remove the blank transponder key from the ignition.
7. Repeat steps 2-6 two more times (for a total of 3 times.).
8. On the fourth time, leave the blank transponder key in the ignition and turn it to the “START” position to start the engine.
The autostart nahas2501 is now reprogrammed.
