Method 1: Using a Bypass Module:
1. Purchase a Bypass Module: Buy a bypass module compatible with your specific VR Holden model. These modules can be found online or at automotive stores.
2. Locate the Immobilizer: Find the immobilizer unit in your car. It's usually located under the dashboard or behind the steering column.
3. Connect the Wires: Follow the instructions provided with the bypass module to connect the wires to the immobilizer unit's wiring harness.
4. Program the Module: Some bypass modules require programming to match the vehicle's security system. Follow the manufacturer's instructions to program the module if necessary.
5. Test the Module: Insert the key into the ignition and turn it to the "ON" position. If the engine starts and the immobilizer light turns off, the bypass module is functioning correctly.
Method 2: Using a Key Emulator:
1. Obtain a Key Emulator: Get a key emulator that is compatible with your VR Holden model. These emulators can be purchased online or at automotive stores.
2. Program the Emulator: Follow the manufacturer's instructions to program the key emulator to match your vehicle's security system.
3. Install the Emulator: Connect the key emulator to the ignition switch or under the dashboard (instructions vary based on the key emulator).
4. Test the Emulator: Insert the key into the ignition and turn it to the "ON" position. If the engine starts and the immobilizer light turns off, the key emulator is working properly.
Note: Bypassing the immobilizer system may affect the vehicle's security and make it more susceptible to theft. Use authorized methods for immobilizer repairs whenever possible.
