1. Turn the ignition key to the "ON" position, but do not start the engine.
2. Locate the odometer reset button on the instrument panel. It is usually located near the speedometer.
3. Press and hold the odometer reset button until the display changes to "ODO RESET".
4. While holding the odometer reset button, turn the ignition key to the "OFF" position, then back to the "ON" position.
5. The display will change to "SET".
6. Release the odometer reset button.
7. Press and hold the odometer reset button again until the display changes to "0000".
8. Press the odometer reset button one more time to set the new mileage value.
When new timing belt installed the reset is complete, and the "ODO RESET" display will disappear once you drive the car again or after the ignition is left in ON position for few min.
