Front door:
1. Open the front door fully and locate the two vertical bolts on the door hinge at the top and bottom.
2. Use a wrench to loosen the bolts, but don't remove them completely.
3. Insert a pry bar or a large flat-head screwdriver between the door and the door frame, near the top bolt.
4. Gently pry the door outward until it is aligned correctly.
5. Tighten the top and bottom bolts securely.
Rear door:
1. Open the rear door fully and locate the two horizontal bolts on the door hinge at the front and back.
2. Use a wrench to loosen the bolts, but don't remove them completely.
3. Insert a pry bar or a large flat-head screwdriver between the door and the door frame, near the front bolt.
4. Gently pry the door inward until it is aligned correctly.
5. Tighten the front and back bolts securely.
Note: Be sure to adjust the doors evenly on both sides of the vehicle to ensure proper operation and prevent misalignment. If the doors are not aligned correctly, it may affect their ability to open and close smoothly.
