What is the best homemade tool to remove lifters?

There are a few different homemade tools that can be used to remove lifters. One option is to use a deep socket that is slightly smaller than the lifter. The socket can be placed over the lifter and then tapped with a hammer until the lifter pops out. Another option is to use a pry bar or crowbar. The pry bar can be inserted between the lifter and the block and then used to pry the lifter out. Finally, it is also possible to use a slide hammer to remove lifters. The slide hammer has a long, thin shaft with a hook on the end. The hook can be inserted into the lifter and then the slide hammer can be used to pull the lifter out.

Here are step-by-step instructions for using a deep socket to remove lifters:

1. Find a deep socket that is slightly smaller than the lifter.

2. Place the socket over the lifter.

3. Tap the socket with a hammer until the lifter pops out.

4. Repeat steps 2 and 3 for each lifter that needs to be removed.

Here are step-by-step instructions for using a pry bar or crowbar to remove lifters:

1. Find a pry bar or crowbar that is long enough to reach between the lifter and the block.

2. Insert the pry bar or crowbar between the lifter and the block.

3. Pry the lifter out of the block.

4. Repeat steps 2 and 3 for each lifter that needs to be removed.

Here are step-by-step instructions for using a slide hammer to remove lifters:

1. Find a slide hammer that has a long, thin shaft with a hook on the end.

2. Insert the hook into the lifter.

3. Pull the slide hammer towards you to remove the lifter.

4. Repeat steps 2 and 3 for each lifter that needs to be removed.