1. Put the vehicle in Park.
2. Set the parking brake.
3. Turn off the engine.
4. Climb under the body and locate the locking hubs on both sides of the front axle.
5. Rotate the locking hub clockwise until the "Lock" indicator appears.
6. Repeat step 5 for the other side.
7. Start the engine and start using 4WD.
4WD System Activation
1. Put the transmission into neutral.
2. Shift the transfer case lever into the 4H or 4L position.
- 4H - Part-Time Four-Wheel Drive (high range)
- 4L - Four-Wheel Drive (low range)
3. Select the appropriate gear for your desired speed.
4. Gradually release the parking brake.
5. Accelerate slowly and steadily in 4WD mode.
*Note: When engaging 4WD on dry surfaces, make sure to keep the steering wheel straight to avoid any damage to the driveline.*
