* Lug wrench
* Chock or parking block
* Jack and jack stands
1. Loosen the lug nuts. Use the lug wrench to loosen the lug nuts on the front wheel that you want to remove. Do not remove the lug nuts completely at this point.
2. Raise the vehicle with a jack and support it with a jack stand. Place the chock or parking block behind the rear tires to help prevent the vehicle from rolling. Position the jack under the frame of the vehicle near the front wheel that you want to remove. Raise the vehicle until the tire is off the ground. Once the vehicle is raised, place a jack stand under the vehicle near the front wheel that you want to remove. Lower the vehicle onto the jack stand.
3. Remove the lug nuts and take off the wheel. Now you can remove the lug nuts completely and take off the wheel. Be careful not to drop the wheel on your foot or leg.
Tips:
* If the lug nuts are difficult to loosen, you can try using a breaker bar or a lug wrench with a cheater pipe attached.
* When you are reinstalling the wheel, be sure to tighten the lug nuts in a star pattern. This will help to ensure that the lug nuts are tightened evenly and that the wheel is securely attached.
