Auto >> AutoSPT >  >> Auto Repair

How do you remove the rear bumper Toyota Echo?

To remove the rear bumper on a Toyota Echo, you will need the following tools:

- Phillips head screwdriver

- Flat head screwdriver

- 10mm socket wrench

- 12mm socket wrench

Step 1: Remove the 4 Phillips head screws holding the bumper in place.

- There are 2 screws on each side of the bumper, located near the wheel well.

Step 2: Remove the 2 10mm bolts holding the bumper to the frame.

- These are located on the bottom of the bumper, near the center of the vehicle.

Step 3: Remove the 2 12mm bolts located on the top of the bumper.

- You may need a flashlight to see these bolts, as they are difficult to see.

Step 4: Pry the bumper loose from the clips holding it in place.

- Use a flat head screwdriver or pry bar to carefully pry the bumper loose from the clips. Start at the sides and work your way towards the center.

Step 5: Remove the bumper from the vehicle.

- Once the bumper is loose, remove the old one and install the new one in the reverse order.

Auto Repair
Do you need a mechanics license to install car tires as business? How do you change a back wiper blade on Mazda 2007 cx-7?
Car Care
Should You Buy a Spare Tire Routine Maintenance Checklist The Importance Of Maserati Maintenance
Engine
What is the mpg of a double decker bus? How to change an alternator fuse on 93 a Lexus Gs300?
Electric Car
Where can one buy a used Toyota Hilux? Do you need a cdl to drive fire truck in ga? How much oil does a 2000 Chevrolet 4.8 hold?
Autopilot
10 years after DARPA Urban Challenge Team Victor Tango still works together Where do if find the crank positioning sensor for a 2000 land rover discovery?
Car Photos
What size are the windshield wipers of a vw 2009 Jetta? Where are the jacking points on a 1966 beetle? Is the 2006 Volkswagen Golf front wheel drive rear or four drive?