Auto >> AutoSPT >  >> Auto Repair

How do you adjust Honda Element doors?

To adjust the doors on a Honda Element, you will need the following tools:

- Phillips head screwdriver

- Flat head screwdriver

- 10mm wrench

1. Open the door and locate the door hinge bolts. There are three bolts on each hinge.

2. Loosen the top two bolts on each hinge with a 10mm wrench.

3. Use a flat head screwdriver to pry open the door stop located at the bottom of the door.

4. Insert a Phillips head screwdriver into the hole in the door stop and turn it clockwise to adjust the door.

5. Tighten the top two bolts on each hinge.

6. Repeat steps 2-5 for the other door.

Note: If the door is sagging, you may need to adjust the bottom bolt on the hinge. To do this, loosen the bottom bolt and use a flat head screwdriver to pry open the door stop located at the top of the door. Then, insert a Phillips head screwdriver into the hole in the door stop and turn it counterclockwise to adjust the door. Tighten the bottom bolt on the hinge.

Auto Repair
How do you change the accessory delay on a 2008 Jeep Patriot? What To Do In Case Of An Accident
Car Care
How to Tell if Someone Is Too Drunk to Drive These Are The Most Expensive Cars To Maintain What companies offer insurance for classic cars like a 1969 Chevelle?
Engine
The engine temp on my 1997 Chevy cavalier is 195 after warm up this normal? How do you relieve the fuel pressure on a ford e-150 5.8?
Electric Car
How do you open hood of 1997 cadillac deville when battery is dead? Which of KTM Exhausts top brands would you consider purchasing? Where is the pcv valve located for a 2002 kia sportage?
Autopilot
Can you push an automatic trasmission in neutral to about one mile away? How do you set the timing on a 1996 f150 six cyl?
Car Photos
Location of 2006 Chevy 4.2 L trailblazer cam sensor? My Porsche boxter 2001 needs a radio code to work . Can you help me? Where should one search for a 1998 Toyota Camry sale?