* A 10mm socket wrench
* A Phillips head screwdriver
* A flat head screwdriver
* A pry bar
Step 1: Remove the screws from the top of the bumper.
*Open the hood of the car.
*Locate the two screws on the top of the bumper, near the headlights.
*Remove these screws using a 10mm socket wrench.
Step 2: Remove the screws from the bottom of the bumper.
*Locate the four screws on the bottom of the bumper, near the fog lights.
*Remove these screws using a 10mm socket wrench.
Step 3: Remove the Phillips head screws from the sides of the bumper.
*Locate the two Phillips head screws on each side of the bumper.
*Remove these screws using a Phillips head screwdriver.
Step 4: Remove the flat head screws from the bottom of the bumper.
*Locate the two flat head screws on the bottom of the bumper, near the fog lights.
*Remove these screws using a flat head screwdriver.
Step 5: Pry the bumper away from the car.
*Using a pry bar, gently pry the bumper away from the car, starting at the sides.
*Work your way around the bumper until it is completely removed.
Step 6: Disconnect the electrical connectors.
*Disconnect the electrical connectors for the fog lights and turn signals.
*These are located on the back of the bumper.
Step 7: Remove the bumper.
*Once all of the electrical connectors are disconnected, you can remove the bumper from the car.
